manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, Руководство пользователя, Страница: 280 / 1665

Поделиться
Скачать
IDEC MICRO/I HG4G-CJT22 F-B Series Скачать руководство пользователя страница 280

3 Project Settings Dialog Box

4-26

WindO/I-NV4 User’s Manual

■

Backlight

These options configure the backlight control function.

■

Enable Touch Sound

Select this check box to play a sound when the screen is pressed.

■

Enable Maintenance

Select this check box to display the maintenance screen during operation. The methods for displaying the 
maintenance screen are as follows.
Press the upper-left corner of the MICRO/I screen for three seconds or more.
If the base screen is switched before three seconds have elapsed, the load operation for the maintenance screen will 
be canceled. Please press the screen again.

*1 HG5G/4G/3G-V, HG4G/3G only

Auto OFF:

Select this check box to turn off the backlight when the MICRO/I is unused for an extended 
period of time. To turn on the backlight, touch the screen or write 1 to System Area 1 Backlight 
auto off bit (address 1, bit 5) or System Area 1 Backlight bit (address 1, bit 0).
Time (min): Specifies the time (1 to 9999) from when the MICRO/I is last used to when the 

backlight is turned off.

Halve the Brightness: Select this check box to lower the backlight brightness when the MICRO/I is unused for an 

extended period of time. To return to the backlight to its original brightness, touch the screen 
or write 1 to System Area 1 Backlight bit (address 1, bit 0).
Time (min): Specifies the time (1 to 9999) from when the MICRO/I is last used to when the 

backlight brightness is lowered.

Light ON with Screen Changing:

When the backlight is turned off or when the backlight brightness has been lowered with the 
backlight control function, select this check box to turn on the backlight or restore the 
backlight brightness when the screen is switched.
This option can only be configured when the 

Auto OFF

 check box or the 

Halve the 

Brightness

 check is selected.

(Touch sound)

*1

:

These options select the touch sound.
These options can only be configured when 

Enable Touch Sound

 is selected.

Beep Sound:Plays a beep (electronic sound).
Sound File: Plays a sound file.

Sound ID:

Configures the sound file to play as the touch sound.
Click 

 to display the 

Sound Settings

 dialog box. For the 

sound file configuration procedure, refer to Chapter 21 “To play 
a sound file as a touch sound instead of a beep.” on page 21-3.

Control by Device Address:

When 

Beep Sound

 is selected, select this check box to control the touch sound with 

a value of device address. When 

Sound File

 is selected, the touch sound cannot be 

controlled with a value of device address, even if this check box is selected.
This option can only be configured when 

Enable Touch Sound

 is selected.

(Device Address): Specifies the word device that controls the touch sound.

Click 

 to display the Tag Editor. For the device address 

configuration procedure, refer to Chapter 2 “5.1 Device 
Address Settings” on page 2-68.
The control over a touch sound with a value of device address 
is as follows.
0: Do not play the touch sound.
1: Play the touch sound.
2: Play a shortened touch sound.

Press and hold 
3 or more seconds

MICRO/I

Содержание MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов