3
INSTALLING THE REAPER
Installing the latest software version downloadable from
www.ideazon.com
is highly
recommended.
NOTE: The Reaper software is an optional component; it is not required for standard functionality.
1. Connect the Reaper to an available USB port on your computer, wait for Windows to auto-
recognize the device and automatically install the basic drivers.
2. Double-click the latest installation software you downloaded or place the Reaper CD in the
CD-ROM drive. NOTE: The "Auto-run" feature should start the installation process
automatically. If installation does not begin automatically, open "My Computer", click on the
CD ROM drive (Usually marked "D"), and double-click "REAPER-SETUP.EXE".
3. In the first window, read the instructions carefully and click ‘Next’ when you are ready to
proceed with the installation.
4. In the "Destination Location" window you have the option to install the software to the
default location (‘‘\Program Files\Reaper’’) or click ‘Browse’ to choose a new location. Click
‘Next’ to install the software to selected location.
5. You are now ready to install the Reaper software. Click ‘Next’ to begin the installation.
6. Congratulations! You have successfully installed the Reaper software. Click ‘Finish’ to
finalize the installation.
After installation is complete a black 'Z' tray tool icon will appear in your System Tray. You
can access the Reaper software by double-clicking the ‘Z’ tray tool icon.
