BOILER OVERHEAT THERMOSTATS
The boiler is fitted with two safety “cutout” thermostats which
may shut the boiler down in the event of overheating.
If thermostat No. 1 operates, the pilot will be extinguished.
If thermostat No. 2 operates, the main burner will not fire but the
pilot will remain alight.
Should this occur then turn off the boiler and consult your local
Heating Installer.
CONTROL OF WATER TEMPERATURE
1. Central Heating
The boiler control thermostat automatically switches the
main burner OFF and ON to maintain the pre-set
temperature, and no adjustment is necessary.
2. Domestic Hot Water
The domestic hot water draw-off temperature can be
controlled by adjusting the flow rate at the tap - the lower the
draw-off rate, the higher the temperature and vice-versa.
The maximum draw-off temperature is limited by the
modulating gas control which reduces the main burner flame
at low draw-off rates.
3. The pilot burner remains alight continuously to give re-
ignition of the main burner.
TO RELIGHT THE BOILER
Repeat the procedure 1-9 detailed in “to Light the Boiler”.
ESCAPE OF GAS
Should a gas leak be suspected, contact your Local Gas Region
without delay.
Do NOT search for gas leaks with a naked flame.
CLEANING
For normal cleaning simply dust with a dry cloth. To remove
stubborn marks and stains, wipe with a damp cloth and finish off
with a dry cloth.
Do NOT use abrasive cleaning materials.
MAINTENANCE
The appliance should be SERVICED AT LEAST ONCE A YEAR
by a qualified Heating Engineer or your local Gas Region.
Ideal Boilers, P.O. Box 103, National Ave, Kingston upon Hull,
HU5 4JN. Telephone: 01482 492 251 Fax: 01482 448 858.
Registration No. London 322 137.
November 2002
UIN 116 011
Caradon Ideal Limited pursues a policy of continuing improvement
in the design and performance of its products. The right is therefore
reserved to vary specification without notice.
Ideal Installer/Technical Helpline: 01482 498663
www.idealboilers.com
