#61-844EU
ND-7043-1EU
Page 14 of 24
5.4.
Audio Settings
♦
Imager Sounds
Select “Off” to mute all audible outputs.
♦
Voice Annotation
Select “Session” to add a voice message at the start of a set of images (A
session ends when the imager is switched off).
Select “Individual” to add a voice message to each saved image.
Select “Ind. and session” to add a common voice message at the start of a set of
images and add additional comments for each image.
♦
Voice Playback
Select “Speaker” or “Headset” for the desired method of audible outputs.
♦
Volume
Select the volume of the audible outputs from 0 to 9.
If session is selected the voice message is recorded in the audio settings by
pressing Function Key 3. Pressing Function Key 3 again stops recording. Function
Key 2 can be used to play back the recorded message. Function Key 3 can be
used to re-record if necessary.
