IDEAL 61-337, Руководство по эксплуатации и безопасности

Страница: 14 / 90

14
SEL Button
Lead Warning
Fuse Warning
Lead Warning:
When inserting the test
lead into any amperage input terminal, but
the rotary function switch IS NOT set to
the correct relative amperage position, the
meter will beep at 3Hz, LCD will display
” LEAd “ and “ . ”, flashes at 3Hz. If any
amperage function is selected first, but the
test lead IS NOT in the relative amperage
input jack,the meter will also beep at 3Hz
and the LCD will display “ LEAd ” and
“ . ”, flashes at 3Hz.
Fuse Notification:
The test leads
CANNOT be short circuited or used for
measuring while testing the fuse.
1. If the 400mA/600V fuse is blown,
setting the rotary switch to the “mA”
or “uA” setting, the LCD will display
“ FUSE ” and “ . ”, and the buzzer
will beep continuously at the same time.
2. If the 10A/600V fuse is blown, setting
the rotary switch to the “A” setting, the
LCD will display “ FUSE ” and “ . ”,
and the buzzer will beep continuously at
the same time.
The SEL Button allows the user to toggle between multiple
functions when the function dial is used to select a specific
function. This can include but is not limited to toggling between
degrees F and C, AC and DC voltage or current, continuity,
resistance, capacitance and diode measurements.