-21 -
5222 DIGICUT
A
Eject function
If button
j
O
is pressed instead of button
S
Q
,
after inserting the measurement
S
, the
backgauge will advance forwards so that
paper can be removed. Finally the backgauge
moves to the last setting.
Adjust the eject-dimension
• Press
p
, hold, and press
T
e
on
display.
• Insert the desired dimension.
(Standard is 20 cm).
•
g
Store dimension.
•
p
+
s
Escape the program mode.
Program buttons
b
and
j
programs
Press
p
,
hold, and press
b
(
ö
appears on
the display) or
Press
p
,
hold, and press
j
(
Ü
appears
on the display)
•
Enter the desired dimension (For example:
29,7 cm x 21 cm can be entered for DIN A4)
•
g
Store dimension.
Display in cm or inch
•
Press
i
display changes between cm
and inch (see page 19).
Cutting counter
•
Press
i
and hold and press
0
.
number of cuts are shown.
Press
c
twice to delete the number of cuts.
Press
s
to escape the cutting counter.
Cutting activation
Warning!
• Run backgauge to the front for turning the
paper stack.
• Do not interrupt the upward movement of the
blade by performing switching procedures.
• Release blade only when LED "S" has gone
out.
• The safety area (
A
) must be free.
• Blade must always be at the top and be
covered by the clamp. Do not touch the blade.
Risk of injury!
• Press both buttons of the two-handed control
system simultaneously and keep them
pressed until the paper is completely cut.
•
Operation
•
