•
Loosing screwed connections which are adhesive-fastened, PVC stickers, e.g. on commercial and private vehicles
•
Fastening or removing of edge-bandings
Thawing
•
Thawing iced-up steps, car locks, boot-lids and doors, and water-pipes
•
De-frosting refrigerators and deep-freezes (do not heat the plastic walls, as this could lead to deformation or damage)
Disinfecting
•
With hot air at 1100 ºF rabbit hutches, etc. are rapidly freed of bacteria and insect pests
•
Destruction of woodworm. Do not overheat the surface of the wood (fire danger!)
Heat Elite Set-Up
•
Fit the adapter as required.
•
The supply voltage must be as indicated on the nameplate.
•
Supply cable and plug must be in perfect condition. No damage of any kind is acceptable.
Connect the tool to the main power supply.
The tool starts operation with the last program
and settings in use.
Main switch in position I
Example:
Attention:
Heating starts immediately.
Heat Elite Plus LCD, Operating Principles
Individually adjustable values
•
Temperature:
Indicated value +/- 50 °C respec/- 90 °F
Maximum value 650 °C respectively 1200 °F
At the program
FREE
SETTING, the entire range of
80°C
–
650°C respectively 180°F - 1200°F is available
•
Air volume:
7.0 - 17.5 cfm in 5 steps
Memory Function
Each individual adjustment can be confirmed with and is memorized. Without this
confirmation, the adjustment will be memorized automatically after 10 seconds of
operation.
Increase of the life expectancy
At the end of every use and before switching off, the hot air tool should be cooled down
to approx. 100°C/ 210°F (
COOL DOWN
DEVICE).
Operating unit
Function Program
Set/Current Temperature
Seet Air Volume
Operating Elements
C/
F Indication: The temperature
can be adjusted in steps of
5
C/10
F with the keys “-“ or “+”
Air Volume: The air volume
can be adjusted in 5 steps with
the keys “-“ or “+|”
Minimum air volume
Maximum air volume
