IDEAL 4215, Руководство по эксплуатации, Страница: 17 / 44

- 17 -
A
B
C
D
E
•
Operation
•
The measurement is set with the backgauge
crank.(
A
) The symbol – rotary direction –
moves to the right on the display ( B ) (see
picture
C
). The rotary direction of the
backgauge crank ( A ) is indicated on the right.
Keep turning the backgauge crank to the right
until a measurement appears (see picture
E
).
The reference position is reached.
The cutting size can now be set with the
handle ( A ).
If the backgauge is right at the front
the
symbol – rotary direction – will move to the
left (see picture
D
). Turn the backgauge crank
to the left until the rotary direction appears on
the right in the display (see picture
C
).
Afterwards turn the backgauge crank to the
right until a measurements appears (see
picture
E
). The reference position is reached.
The cutting size can now be set with the
handle (
A
). Proceed to position
!
from the
rear.
Measurement is shown on the display in inches
or cm (
B
).
Information:
When the machine is only switched off by the
Key switch
G
(main switch
E
is still ON) it is
not necessary to advance to the reference
point when a new measurement is inserted.