- 27 -
2.
1.
2.
1.
3.
5.
A
4.
Close the safety guard (
1.
) Lower the blade by
pressing both cutting buttons (
2.
). Keep one
button pressed and turn off the main switch (
3.
).
Open the safety guard (
4.
). With the special
wrench (
B)
the 3 eccentrics shall be screwed
so far down (
5.
)until the paper is cut along the
entire length of the blade (The blade must
remain parallel, not too deep into cutting stick).
Turn main switch to position I. (
1.
) The blade
will return to the upper position and the blade
screws should be tightened firmly (
2.
).
Danger!
Do not turn main switch to position
"0" whilst blade is moving upwards! The clamp
must always overlap the blade!
Risk of injury!
•
Blade and cutting stick replacement
•
Clamping
Blade
OK
OK
