RS-485 input/out
– Control and program
Pan/Tilt/Zoom (PTZ)
cameras and monitor
incoming PTZ control
signals to assist in
troubleshooting.
Setup security
monitors
– Use the
analogue Video Out port
on the tester with the
test pattern generator
function to setup security
monitors.
Camera audio
testing using
audio in port
– Test
microphone equipped
cameras using the tester’s
internal speaker.
Troubleshooting
HDMI
– Use the HDMI In
port connect to any HDMI
source to isolate Network
Video Recorder (NVR) vs
monitor problems.
HDMI In
– Eliminates
the need for a separate
monitor.
HDMI output
– Display
tester screen on a larger
monitor using HDMI for
greater clarity.
Analogue/AHD/CVI/
TVI video input
-
Connect to all common
analogue and HD-
over-coax cameras for
maximum versatility.
Camera audio
testing using audio
out port
– Listen
to the camera audio
through the tester using
external headphones/
earbuds. Useful in noisy
environments.
Power up camera
with PoE+
– RJ45
network port provides
PoE+ (up to 24 watts)
to the camera using
the internal battery
when network power is
unavailable.
USB charging
– High
power 2A USB port to
quickly charge devices
such as mobile phones
and tablets. (Please
note this port does not
support data transfer).
PoE+
troubleshooting
– Display the PoE
consumption of the
attached camera in real-
time using the power
monitor tool. Displays
voltage by pair and total
wattage drawn.
Data cable testing
– RJ45 port to perform
wiremap testing of
unshielded twisted pair
(UTP) data cabling.
Automatically identify
cross over cables and
common wiremap faults
using the Tracer/Remote.
microSD slot
–
Transfer test reports or
import software updates
using microSD cards.
12V DC power
supply
– Power any
camera using the built-in
12V/2A DC power supply.
Flashlight
– Bright
LED flashlight with
5/10/30/60 minute auto-
off options.
