IDEAL INDUSTRIES NaviTEK II, Руководство пользователя

Страница: 25 / 46

NaviTEK II 151810 Iss 1
User Guide Page 25
From the Ethernet home screen select the STATS icon, the Stats screen is shown on the display, Fig 36.
When an IP test result is saved, all Stats data available at the time of the test is also saved to the
same Result.
The graph shows Traffic Utilization and plots time
against %utilization. Press the soft key SCALE
(F2) to change the time axis between 60secs,
10mins and 60mins.
Fig 36
Stats menu description
Select from the five buttons below the graph to provide the information that follows:
IP
The F1 soft key is used to toggle between IPv4 and IPv6 data.
The IPv4 data listed is:
Info: IP Assigned successfully or, Listening or, DHCP failed.
Also listed are: IP Address, Gateway, Subnet Mask, Primary & Secondary DNS, DHCP Server.
The IPv6 data listed is:
Info: IP Assigned successfully or, Listening or, DHCP failed.
Also listed are: IP Address, Prefix-64 or 128 bit, Link Address, Gateway, Primary & Secondary DNS.
MAC
Tx and Rx data listed is:
Total frames, Total Bytes, Unicast frames, Broadcast frames, Multicast frames, Max Frames/sec,
Current, Average and Maximum rate in b/s, Current and Average Utilization as %, frame Size
Distribution.
Discovery data listed is:
LLDP/CDP/EDP, Protocol, MAC Address, Hostname/address, Port Name.
www.vemco.pl