
The Ideal H20 Reverse Osmosis Systems have pre-filters that will
need to be replaced after a certain time period of use. By keeping up
with the replacement of your filters, you can double, or even triple,
the life of your RO membrane. This length of time these filters will
last is completely dependent on how clean your water source is.
The RO membrane will usually last 6 months to 2.5 years. Again, by
changing your pre-filters regularly, the RO membrane will last much
longer.
MAINTENANCE AND FILTER CHANGES
Step 1 –
Unscrew the white cap from the membrane housing.
Step 2 –
Remove the membrane from the housing with a pair of needle
nose pliers. Hold onto the membrane housing while you are
pulling the membrane out.
Step 3 –
Insert new membrane into membrane housing and screw the white cap
back onto the white membrane housing, making sure the cap is firmly
hand tightened (refer to step 1 on page 6).
Always make sure to run the
system for 30 to 40 minutes
before use, especially after
changing the filters and
RO membranes
REPLACING THE RO MEMBRANE
8
9