ideal commercial Evomax 60 Скачать руководство пользователя страница 3

3

EVOMAX 

User’s

1  BOILER CONTROLS / DISPLAY

Standby Mode
For Central Heating
     select Winter Mode
For Hot Water
     select Summer or Winter

Standby Mode

If the boiler has been switched to Standby Mode the following screen will be displayed

No Boiler operation will take place with this setting.  See Frame 38 to change to Summer or Winter 

setting

Summer Mode

For Central Heating
     select Winter Mode
No Hot Water Demand
Switched Live 

Off

Summer Mode

If the boiler has been switched to Summer Mode a screen similar to the following will be displayed 

(line 5 may vary depending on setup)

Domestic Hot Water operation will take place with this setting but Central Heating will not.

See Frame 38 to enable Central Heating by changing to Winter setting

Winter Mode
No Central Heating
      Demand
No Hot Water Demand
Switched Live 

Off

Winter Mode

If there is no current Heat Demand a screen similar to the following will be displayed (line 5 may vary 

depending on setup)

Line 5 indicates “Switched Live” or “OpenTherm” or “0-10V” depending on which controls are 

connected to the boiler

Hot Water
DHW Switched Live On
Burner On
DHW Thermostat
Flow Temp 

80°C

Domestic Hot Water Mode (DHW Thermostat)

If there is an ongoing Domestic Hot Water Demand using a DHW 

Thermostat screens similar to the following will be displayed

Line 2 indicates whether Switched Live or OpenTherm is 

controlling the boiler

Line 3 indicates the current operating State (Pre-Purge or Ignition 

or Burner On or Pump Overrun)

Burner Power and Flow Temperature will vary as the boiler 

operates

Hot Water
Burner Power 

100%

Burner On
DHW Thermostat
Flow Temp 

80°C

Central Heating
CH Switched Live On
Burner On
Flow Setpoint 

80°C

Flow Temp 

80°C

Central Heating Mode

If there is an ongoing Central Heating Demand screens similar to 

the following will be displayed

Line 2 indicates whether Switched Live or OpenTherm is 

controlling the boiler

Line 3 indicates the current operating State (Pre-Purge or Ignition 

or Burner On or Pump Overrun)

Outside temperature will only be shown if an outside sensor is 

connected to the boiler

Burner Power and Flow Temp will vary as the boiler operates

See Frame 38 for adjusting Flow Setpoint

Central Heating
Burner Power 

100%

Outside Temp’  

10°C

Flow Setpoint 

80°C

Flow Temp 

80°C

Boiler Frost Protection Mode

If the boiler flow temperature drops below 5°C screens similar 

to the following will be displayed

Line 3 indicates the current operating State (Pre-Purge or 

Ignition or Burner On or Pump Overrun)

Outside temperature will only be shown if an outside sensor 

is connected to the boiler

Burner Power and Flow Temp will vary as the boiler operates

Boiler Frost Protect
Burner Power  

100%

Outside Temp’ 

10°C

Frost Setpoint 

5°C

Flow Temp 

80°C

Boiler Frost Protect
Burner Power  

100%

Burner On
Frost Setpoint 

5°C

Flow Temp 

80°C

Отзывы: