Supplied By www.heating spares.co Tel. 0161 620 6677
5
Minimiser SE -
User's
BOILER CONTROLS
LEGEND
A
'Burner on' neon
B
Thermostat knob
C
Condensate drain
Escape of gas
Should a gas leak or fault be suspected contact your local gas
supplier without delay.
Do NOT search for gas leaks with a naked flame.
Condensate Drain
The condensate drain must not be modified or blocked.
Blockage of the condensate drain, caused by debris or freezing,
can cause automatic shutdown of the boiler.
If freezing is suspected and the pipe run is accessible an attempt
may be made to free the obstruction by pouring hot water over
the exposed pipe and clearing any blockage from the end of the
pipe. If this fails to remedy the problem the assistance of a CORGI
registered installer should be sought.
Cleaning
For normal cleaning simply dust with a dry cloth.
To remove stubborn marks and stains use a damp cloth and mild
detergent.
DO NOT use abrasive cleaning materials.
°C
°F
1
50
120
2
60
140
3
66
150
4
71
160
5
77
170
6
82
180
Maintenance
The appliance should be serviced at least once a year by a CORGI
registered installer.
Control of water temperature
1.
Set the boiler thermostat knob to give the required temperature
2.
The boiler thermostat automatically switches the main burner
OFF and ON to maintain the selected temperature.
Approx. flow temperatures for the boiler thermostat settings are:
Knob Setting
Flow Temperature
