Ideal Boilers Mexico Super CF 3/40, Руководство по установке и обслуживанию

Страница: 27 / 36

27
Mexico Super CF 3/40 - 3/80 -
Installation
43 IGNITION ELECTRODE REPLACEMENT
SERVICING
44 THERMOCOUPLE REPLACEMENT
1. Lift off front panel and remove the grille
assembly. Refer to Frames 28 & 29. Undo the
gas cock union and the 4 wing nuts to remove
the burner and controls assembly from the
boiler.
2. Remove the purse clip.
3. Undo the thermocouple nut at the pilot burner
and pull the thermocouple clear.
4. Undo the thermocouple connection at the gas
valve and withdraw the thermocouple.
5. Fit the new thermocouple and re-assemble in
reverse order
Note. Avoid sharp bends in the thermocouple lead and ensure
that it follows the same route as previously.
Detail of pilot burner assembly
1. Lift off front panel and remove the grille assembly. Refer
to Frames 28 & 29. Undo the gas cock union and the 4
wing nuts to remove the burner and controls assembly
from the boiler.
2. Disconnect the ignition lead.
3. Hold open the electrode retaining clip and withdraw the
electrode.
4. Fit the new electrode and re-assemble in reverse order.
Detail of pilot flame length and spark gap
SER
VICING