Ideal Boilers Mexico Slimline RS 3/40, Руководство по установке и обслуживанию

Страница: 29 / 40

29
Mexico Slimline RS 3/40 & 3/50 -
Installation
SERVICING
44 MAIN BURNER REPLACEMENT
45 MAIN BURNER INJECTOR REPLACEMENT
1. Lift off lower front panel and
remove the grille assembly. Refer
to Frames 28 & 29. Undo the gas
cock union and the 2 wing nuts to
remove the burner and controls
assembly.
2. Unscrew the burner injector from
the manifold.
3. Fit the new injector using an
approved jointing compound and
re-assemble in reverse order.
SER
VICING
1. Lift off lower front panel and remove the grille assembly. Refer
to Frames 28 & 29. Undo the gas cock union and the 2 wing
nuts to remove the burner and controls assembly.
2. Undo the nut securing the pilot bracket to the main burner and
remove the pilot bracket.
3. Remove the 4 nuts and washers securing the main burner to
the front plate and gas manifold. Withdraw the burner.
4. Remove the nuts securing the burner baffles to the burner.
5. Fit the new burner and re-assemble in reverse order, taking
care not to damage the main burner injector, which is screwed
into the end of the gas manifold.