Setting the humidity
The unit is set at the factory for CONTINUOUS OPERATION (”CO”) if no
humidity adjustments are made, or if you set a humidity level below 26%.
To adjust the relative humidity level from 26% to 90% press once.
Setting the timer
Ensure that the clock is correct before setting the timer.
To set the timer, press > > for
Press the key to select “Humidity Setting.”
Humidity Setting
Timer Clock
Timer on
Timer off
Press or to adjust humidity between 26% and 90%.
Remember, if you select a humidity value BELOW 26% the unit will display
“CO” for continuous operation.
When desired humidity level is reached press to set.
OPERATION
NOTES:
1. When the adjusting humidity between 26% and 90%, operation halts until the
humidity setting has been entered and set. When set, the screen will display
“completed”, and the unit will automatically resume operation.
2. This unit has battery backed up memory to allow for auto-restart. If the power is
interrupted to the unit, it will return to its previous humidity setting and continue
to operation once AC power is restored.
NOTE: Pressing the “Power ON/OFF” key during timer operation will not cancel
timer settings. Also, the unit will not function if both the “Timer on” and “Timer
off” settings are the same.
To set a time for the unit to start, select “Timer on” and set the hour
(00 to 23) and minute (00 to 59) fields to desired start time. Once the
desired start time is reached, select “YES” to set. To set the time for the
unit to stop, select “Timer off” and set the hour and minute fields to
desired stop time. Select “YES” to set.
To CANCEL the time display, move the cursor to “ON” and press
TOGETHER
NOTE: The “RAN” field displays continuously during operation. Like a car
odometer, this shows the total number of hours on the unit and cannot be
manually reset outside the factory.
Standby CH00%
Ran 00000H
Standby CH00%
Last job 00:00
Standby CH00%
Time 00:00
Purging the unit
During normal operation the pump purges the condensate reservoir
automatically when it is full. However, use “PURGE” before moving the
machine to avoid water spillage. The pump will shut off automatically
after 40 seconds of continuous operation.
Press the key to empty water from the pump reservoir.
Turning the unit OFF
DO NOT turn the power OFF by disconnecting the power cord from
the outlet!
OPERATION
Press the “Power ON/OFF” key once to turn the power OFF.
The LCD screen will display the following message:
Dehumidifier off
Draining. . .
The water pump will turn on automatically and run for 40 seconds to
drain the residual condensate water in the dehumidifier.
To avoid water spillage DO NOT move the dehumidifier for at least three
minutes after turning the power OFF to allow it time to drain.
Before transporting, be sure to remove the external drain hose, drain it
carefully, and return it to the space provided on the back of the unit.
Make sure the drain hose is connected and routed to a safe location.
ADDITIONAL LCD DISPLAY DATA:
After Power OFF, the LCD may display summary screens of recent
activity and statistics. While not essential for unit operation, this
information may be useful for your records.
