5
TEMPORARY
BUTTON
MANUAL OPERATION
CEILING AND FLOOR
This function is used to operate the unit temporarily in case you misplace the remote control or its
batteries are exhausted. Two modes including AUTO and FORCED COOL can be selected through
the TEMPORARY BUTTON on the air-in grill control box of the indoor unit. Once you push this
button, the air conditioner will run in such order: AUTO, FORCED COOL, OFF, and back to AUTO.
• AUTO: The OPERATION lamp is lit, and the air conditioner will run under AUTO mode. The remote
control operation is enabled to operate according to the received signal.
• FORCED COOL: The OPERATION lamp flashes, the air conditioner will turn to AUTO after it is enforced to
cool with a wind speed of HIGH for 30 minutes. The remote control operation is disabled.
• OFF: The OPERATION lamp goes off. The air conditioner is OFF while the remote control operation
is enabled.
FOUR-WAY CASSETTE
This function is used to operate the unit temporarily in case you misplace the remote control or its
batteries are exhausted. Two modes including AUTO and MANDATORY COOL can be selected through
the TEMPORARY BUTTON on the air inlet grill control box of the indoor unit. Once you push this
button, the air conditioner will run in such order: AUTO, MANDATORY COOL, OFF, and back to AUTO.
• AUTO: The OPERATION lamp is lit, and the air
conditioner will run under AUTO mode. The
remote control operation is enabled to
operate according to the received signal.
• MANDATORY COOL: The OPERATION lamp
flashes, the air conditioner will turn to AUTO
after it is enforced to cool with a wind speed
of HIGH for 30 minutes. The remote control
operation is disabled.
• OFF: The OPERATION lamp goes off. The air
conditioner is OFF while the remote control
operation is enabled.
ADJUST IT UP AND DOWN
ADJUSTING AIR FLOW DIRECTION
CASSETTE TYPE
While the unit is in operation, you can adjust the air flow louver to change the flow direction and naturalize
the room temperature evenly. Thus you can enjoy it more comfortably.
• Set the desired air flow direction. Push the SWING button to adjust the louver to the desired position
and push this button again to maintain the louver at this position.
• Adjust the air flow direction automatically. Push the SWING button, the louver will swing automatically.
While this function is set, the swing fan of the indoor unit runs; otherwise, the swing fan doesn't run. The
swing scale of every side is 300º. When the air conditioner isn't in operation the SWING button will be disabled.
