IdeaFly Poseidon-480, Руководство пользователя

Страница: 8 / 13

2)
Pressing the On/Off button of the remote controller at same time to power on the remote
controller (All the switches must set to the UP)
2. Installing the landing gear
Put the carbon tube to the hole of the gear fixture, please put the carbon tube with groove towards
the screw. Then using the M3*5 screw to fix the gear OK.
3. Installing the propellers
Please install the propellers to the qudcopter follow the picture
shown
4.Installing the payload
1）.
Connect the body board
to payload with the 3 pin cables,
Connect the camera to drone with 3pin
Cables
2
）
.
Align 8 wholes of the glass board and the bottom of the drone,
and fix with 8pcs screws
3）payload controlling
Turn on the remote control and make sure SWD up(top). Power the drone, move the SWD down
to open the payload release open, move SWD up, the payload release closed
07