User Manual
- 2 -
Safety Information
The symbol is used to indicate that some hazardous live
terminals are involved within this apparatus, even under the
normal operating conditions.
The symbol is used in the service documentation to indicate
that specific component shall be only replaced by the com
-
ponent specified in that Documentation for safety reasons.
Protective grounding terminal.
Alternating current /voltage.
Hazardous live terminal.
ON:
Denotes the apparatus turns on.
OFF:
Denotes the apparatus turns off, bec ause of using the
single pole switch, be sure to unplug the AC power to pre-
vent any electric shock before you proceed your service.
WARNING:
Describes precautions that should be observed
to prevent the danger of injury or death to the user.
Disposing of this product should not be placed in municipal
waste and should be collected separately.
CAUTION:
Describes precautions that should be observed to
prevent danger of the apparatus.
WARNING
Power Supply
Ensure the source voltage matches the voltage of the power
supply before turning ON the apparatus. Unplug this appara
-
tus during lightning storms or when unused for long periods
of time.
External Connection
The external wiring connected to the output hazardous live
terminals requires installation by an instructed person, or
the use of ready made leads or cords.
Do not Remove any Cover
There may be some areas with high voltages inside, to redu-
ce the risk of electric shock, do not remove any cover if the
power supply is connected. The cover should be removed
by the qualified personnel only. No user serviceable parts
inside.
Fuse
To prevent a fire, make sure to use fuses with specified
standard (current, voltage, type). Do not use a different fuse
or short circuit the fuse holder.
Before replacing the fuse, turn OFF the apparatus and dis
-
connected the power source.
Protective Grounding
Make sure to connect the protective grounding to prevent
any electric shock before turning ON the apparatus.
Never cut off the internal or external pro tective grounding
wire or disconnect the wiring of protective grounding termi
-
nal.
Operating Conditions
This apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on this apparatus.
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
Do not use this apparatus near water. lnstall in accordance
with the manufacturer’s instructions. Do not install near any
heat sources such as radiators, heat registers, stoves, or
other apparatus (including am plifiers) that produce heat. Do
not block any ventilation openings.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
•
Follow all instructions.
• Keep these instructions.
• Heed all warnings.
•
Only use attachments/accessories spec ified by the manu
-
facturer.
Power Cord and Plug
Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades with
one being wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. lf the provided
plug does not fit into your outlet, consult an electrician for
replace ment of the obsolete outlet.
Protect the power cord from being walk ed on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Cleaning
When the apparatus needs cleaning, you can blow off dust
from the apparatus with a blower or clean with rag, etc. Do
not use solvents such as benzol, alcohol, or other fluids
with very strong volatility and flammability for cleaning the
apparatus body. Clean only with dry cloth.
Servicing
Refer all servicing to qualified personnel. To reduce the risk
of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are
qualified to do so. Servicing is required when the apparatus
has been damaged in any way , such as power supply cord
or plug is damaged , liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed
to rain or moisture , does not operate normally, or has been
dropped.
The mains plug is used as the disconnect device, the dis-
connect device shall remain readily operable.
!
