User Manual
- 2 -
Warnings
The information furnished in this manual does not include all of the details of design and engineering of this particular product
not does it cover every possible application or situation concerning its usage,which may occur during the installation,operation or
maintenance of product.
IMPORTANT
THE PRODCUT REQUIRES CLASS 2 OUTPUT WIRING
CAUTION
!
TO PREVENT ELECTRIC SHOCK,DO NOT REMOVE TOP OR
BOTTOM COVERS. NO USER SERVICIEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DISCONNECT POWER CORD BEFORE REMOVING REAR PANEL
COVER TO ACCESS GAIN SWITCH.
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE!
MAGNETIC FIELD
CAUTION
: Do not locate sensitive high-gain equipment such as preamplifiers or tape decks directly above or below this unit.
Because this amplifier has a high power density, it has a strong magnetic field which can induce hum into unshielded devices that
are located nearby. This field is strongest just above and below the unit. If an equipment rack is used, we recommend locating the
amplifier(s) at the bottom of the rack and preamplifier or other sensitive equipment at the top.
SHOCK HAZARD - DO NOT ENTER
CHOC HASARD - N’ENTRENT
SCHOCKE HAZARD - TEST NICHT BETRETE
URTO HAZARD - DO NON ENTRANO
The lightning bolt triangle is used alert the user to the risk of electric shock
The exclamation point triangle is used to alert the user to important operationg and /or maintenance instructions.
