IDEA CAMERA BIP-VI1A-2M Скачать руководство пользователя страница 13

 

SHENZHEN RISE ELECTRONIC CO., LTD.

 

Website: http://www.ideacamera.com  Email:[email protected] 

Global Sources Homepage Address: http://www.globalsources.com/ideacamera.co 

 

 

Charge the camera: 

Vicoo App will remind you to charge your camera when the battery is low. Please use the 

Micro-USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During 

charging, the camera's indicator light is solid yellow, and when the camera is fully 

charged, the indicator light will turn into solid green. It will take 8 hours to fully charge the 

camera. 

   

When the battery is too low, the indicator light will blink red quickly, with the voice 

prompting "low battery, shutting down". If the charger is not connected, the camera will 

power off automatically. 

 

Firmware upgrade: 

When you connect your camera through the Vicoo App, it will prompt you if the latest 

firmware is available. You can also manually check the firmware upgrade in the settings 

of the App. 

 

Please make sure that your camera is fully charged or connected to the power adapter 

before upgrading the firmware, please do not cut off the power supply during the 

upgrading. 

 

FCC warning: 

This device complies with part 15 of the FCC Rules. Operation is subject to the following 

two conditions: 

Содержание BIP-VI1A-2M
















Отзывы: