OWNER'S GUIDE
3
Bz
DIAGNOSTICS
Your vehicle didn’t remote start? Count your parking light flashes for a system diagnostic and
apply the listed solution.
# OF PARKING
LIGHT FLASHES
DIAGNOSTIC
SOLUTION
3 + 1
Engine is already running
Turn engine OFF
3 + 2
Key in ignition at ON position
Remove key from ignition
3 + 4
Trunk is open
Close trunk
3 + 5
Foot brake is ON
Release foot brake
3 + 6
Hood is open
Close hood
3 + 8
Tach failure
Contact Authorized Dealer
3 + 10
System is in Valet Mode
Exit Valet Mode
3 + 11
Can communication failure
Contact Authorized Dealer
3 + 12
Remote starter not synced
Perform System Sync Procedure
SYSTEM SYNC PROCEDURE
Step 1
Start engine with key
Step 2
Let engine run for at least 15 seconds
Step 3
Turn engine OFF
For any additional assistance, contact your Authorized Dealer.
WHEN SERVICING YOUR VEHICLE
To ensure safety during vehicle servicing the remote starter must be placed in ‘Valet Mode’.
The ‘Valet Mode’ will disable remote start functionality. To activate or deactivate the ‘Valet Mode’,
follow the instructions below:
COMMAND
ACTION
# OF PARKING
LIGHT FLASHES
Activate Valet Mode
Cycle ignition ON/OFF 5x rapidly
2 + 1
Deactivate Valet Mode
Cycle ignition ON/OFF 5x rapidly
2 + 2
www.dvsbg.com
car audio & multimedia system
