inStALLAtiOn MODe SeLeCtiOn
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
MODULe PrOgrAMMing PrOCeDUre
5
Module Programming
Procedure completed.
4
Turn key to OFF position.
OFF
3
Wait, LED will turn solid GREEN
for 2 seconds.
(If after 5 seconds the LED did
not turn solid GREEN, press on
the programming button once.)
1
Insert key into ignition.
2
Turn key to ON position.
ON
Page 5 of 6
ADS-DL(TB)-PL1-EN
20130926
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2013
Transponder Bypass
GM
Doc. No.: ##12224##
