iDance CM2, Инструкция по эксплуатации, Страница: 8 / 11

7
due to a reset of the device. If your device should become unpaired or you find it is unable
to connect, repeat the above steps.
Playing Audio Wirelessly
1. After pairing to a Bluetooth device, use the native controls on the connected Bluetooth Device
or press the BLUETOOTH button of the unit to select a track.
2. Play, pause a selected track using the native controls on the connected Bluetooth Device.
3. Audio played through the connected Bluetooth Device will now be heard through the speakers.
4. Press to adjust the volume up or down to obtain the desired volume level.
5. Slide POWER ON/OFF switch to turn off the unit.
Auxiliary operation
AUX IN Connection
You can play other music sources (iPod, MP3 or other digital audio players) through the speakers of
this unit by connecting the AUX IN Jack to your external player’s audio out jack or headphone jack
1. Plug one end of a 3.5mm audio input cable (not included) into the AUX IN Jack on the rear of
the unit, and plug the other end of the cable into the audio output on the external music player
or other source.
Note: Make sure your external music player is turn ON.
2.
Slide the POWER ON/OFF switch on the rear of the unit to ON to turn on the unit. PAIR
INDICATOR will light BLUE and a sound “iDance CUBE mini, Aux mode“ is heard.
3.
Start playing the device you plugged into AUX IN input.
4.
Press to adjust the volume up or down to obtain the desired volume level.
5.
Slide POWER ON/OFF switch to OFF to turn off the unit. Remember to shut down the
external player power.
Note: In Bluetooth mode, the audio cable plug into the AUX IN jack, the unit will change to AUX mode
automatically.