•
In USB/TF mode, the icon means music is paused
In AUX-IN / FM Mode, the icon will blink when muted
•
USB/TF: Turn ON when playing USB or TF card.
•
MIC: Turn ON when microphone is active
•
: Replay mode is ON
•
Shows “AUX" in Aux in mode.
•
Shows “FM Frequency” in FM mode
•
Shows “playing time” of the song in USB/TF mp3 mode.
The icon will blink when the internal battery level is low and please recharge with included charging adaptor. Or
Blaster 10 will enter protection mode when battery is too low to operate.
1.
Mode – Press to switch between different modes (Bluetooth-USB-TF-FM-LINE IN)
2.
Light ON/OFF – Press to turn on/off LED light show
3.
Repeat – Press to turn ON/OFF report mode.
4.
Previous Song – Press to select previous song in USB/TF mp3 mode or Bluetooth mode
5.
Play/Stop – Press to play/pause the music
6.
Next song – Press to select previous song in USB/TF mp3 mode or Bluetooth mode
7.
USB power input – micro USB power input
(Please connect to USB charger with output 5V with minimum 1A or above)
8.
Power switch
9.
Battery Cover – compartment for internal rechargeable battery (Please DON’T open the compartment with the
help of a technician)
10. Display – LED status display
11. Mic input – 1/4 “ microphone jack input
12. Mic Volume – Turn to adjust microphone volume
13. Bass Volume – Turn to adjust master bass level
14. Mater Volume– Turn to adjust master volume level
15. TF Card receptacle – Insert your TF card with MP3 files
16. USB receptacle - Insert your USB drive with MP3 files
17. AUX IN – 3.5mm mini jack Line-in to connect external line-level music player
Display description
Control Panel description
EN2
