Model 252
Label Printer/Applicator
Operators/Technical Manual
34
4.2.2 Status
The status icon, directly to the right of the ID logo, provides a visual verification of the
current machine operation settings. Use the up and down arrows to scroll through the
various settings
4.2.3 Security
The security icon opens the security menu which gives users the ability to limit
access to the operation parameters of the Model 252. At the most limited setting,
the operator only has the ability to view the status menu and recall any of the four
saved setups. If it is enabled, the operator may also have the ability to change the
Delay Apply value in order to alter the label position on the product. All other
functions require a PIN number to be entered before access is allowed. Once
logged in, pressing the
icon several times to back down to the Password Entry
menu will effectively log out of the protected area.
SECURITY MENU
PIN ENTRY SCREEN
Change Pin – Once logged in, you have the ability to select a different PIN for
the system. By using the same method as Password Entry above, select a new
four digit PIN combination.
Enable Security – Here, the user must enter the correct PIN. Pressing the
icon will validate the entry and either allow or deny access. The default PIN
when shipped from the factory is 1231. If you forget your PIN number, you
will need to call for a service technician, reload the firmware or return the
module to the factory.
Содержание 252
