Page | 12
4.
Under
Device
, select
Update Device Firmware
, then click
Execute Command
.
5.
Navigate to and select the PiP firmware you downloaded earlier and click
Open
.
6.
The PiP will reboot and enter the bootloader, at which point the USDK demo begins updating the
device.
7.
When the firmware update completes, the PiP will reboot again and the USDK demo will prompt
Firmware Update Successful
.
7.
Customer Support
If you are unable to resolve any technical issues, please contact [email protected]
(sending an e-mail to this address will automatically open a support ticket).
