Icy Box Thunderbolt IB-DK406-TB3, Руководство пользователя, Страница: 8 / 12

Manual IB-DK406-TB3
System requirements
• 1x Thunderbolt
™
3 enabled Windows
®
/macOS
®
computer
• 2x DisplayPort
™
enabled monitors with cabling (not included).
• Important
: Your computer must support Thunderbolt ™ 3 in order to
work with this adapter. While Thunderbolt
™
3 utilizes the USB Type-C
™
connector, not all USB Type-C ™ connectors support Thunderbolt 3 ™ .
Please check the specifications of your computer system to confirm
which USB Type-C
™
ports on your computer support Thunderbolt
™
3.
Installation
1. Connect the integrated cable of the DockingStation to a graphics source,
such as desktop or notebook PC with Thunderbolt
™
3 interface.
2. Connect DisplayPort
™
output to monitor (cables not included). Maxi-
mum connection: two different types of DisplayPort ™ monitors.
3. Power on PC and monitors. Select monitors to correct input source.
4. Change the display to clone or extend mode, change the output
display resolution on your computer.
It is recommended that to use the same size, type and resolution
monitors. Same type monitor means the monitors have the same native
resolution and display refresh rate.
After installation, you will see the same image on all monitors (clone
mode) or a single image spread across multiple monitors. To change
the display setting, simply change the graphic card output resolution
via the display properties page.
NOTE : Display resolution with 2 connected 4k monitors
up to 3840x2160@60 Hz /each
5. Connect a USB device and existing LAN cable to the additional ports
on the DockingStation.
Handbuch IB-DK406-TB3
Display
port