7
NAS Mode
In NAS mode, the IB-NAS902 is directly attached to an Ethernet switch. Each user on the
network can use the IB-NAS902 almost as if it were a local drive.
Connecting to your Network
Connect the power adapter to the back panel of the IB-NAS902 and plug the other end to
a wall outlet or power strip. Connect the network cable to the LAN port on the back of the
IB-NAS902 and the other end of the network cable to a port on your hub, switch or
router.
You can also access data in the IB-NAS902 connecting it directly using the
Ethernet cable with your computer. The IB-NAS902 will have a default IP of
169.254.0.1 when connected directly.
The Ethernet port on the IB-NAS902 is Auto-MDI/MDIX, which means you can
connect it using either a crossover or a direct network cable.
Setup IB-NAS902
Configuring the IB-NAS902 on Windows
The IB-NAS902 features a web-based control interface to manage your settings. If you
are using an operating system other than Windows, please refer to next section labelled
“Other Operating Systems”.
Open your web browser and enter
http://Storage or http://Storage-
<XXXX>
in the URL address field.
You can also enter the IP address of
the IB-NAS902.
