Manual IB-G1826MF-C31
SSD installation
Attention
: During the SSD installation the cabling of the enclosure has to be
disconnected from the computer or notebook.
Remove the PCB using the tool provided. Press the tip side of the tool into the small
hole on the bottom of the front of the host port.
Place your SSD carefully with the connector side and at an angle of about 30° into
the M.2 slot so that it fits without resistance. Now place the M.2 rubber mount on
the semicircular notch at the end of the M.2 SSD and carefully press it down until it
is locked into the PCB.
