Manual IB-DK2108M-C
To use this dock to its full potential, ensure that the host USB Type-C
®
port from
your computer supports DisplayPort
™
Alt Mode, as well as Power Delivery or
Thunderbolt
™
3.
Note! The additional USB Type-C
®
port on the DockingStation supports only Power
Delivery (no data transfer).
Installation and use of the DockingStation
1. Connect the USB Type-C
®
to Type-C
®
cable between supported host
computer and Type-C
®
host interface (2) of the DockingStation
2. Connect your devices to the appropriate interfaces on the dock
Maybe the dock will automatically install some of the required drivers once it is
connected to your notebook’s USB Type-C
®
port.
If you receive any prompt, follow the on-screen instructions to complete the
installation.
3. Connect your external monitor to the DockingStation’s video port.
Note
: Video output capabilities are dependent on the video card and hardware
specifications of your connected host notebook. Certain graphics cards have limited
support, while some monitors will also limit the output resolution.
Configure a display device
Please set your display settings according to your operating system and requirements.
For detailed information, consult the corresponding operation manual and descripti-
on of your operating system.
