•
When the IB-1825M-C31 has been plugged correctly the LED will turn on blue!
•
As soon as the write protection has been activated by switch, the status LED continues to light up
blue, but no more data can be copied or changed onto the medium*
*Attention! Changing of the write-protect mode will only be activated when the device has
been disconnected and then reconnected to the host computer.
6. Application
•
The external SSD can be connected or disconnected from the computer without shutting down the
computer.
•
Please await the end of read/write operations before disconnecting the SSD to avoid data lost.
•
A new SSD must first be initialized, partitioned and formatted by the operation system to be
displayed by the system.
•
If the drive isn’t recognized instantly by the operating system please check:
if the driver software is installed (USB)
if the SSD is initialized, partitioned and formatted.
Hint
: Drives must be initialized and have active partitions to be immediately recognized as volumes in the
operating system. If this is not the case, initialize the drives in the volume management of your operating system.
The full USB 3.1 (Gen2) transfer rate can only be achieved with a compatible USB 3.1 (Gen2) host
computer. Furthermore, the USB 3.1 drivers must be installed by the operating system. If this is not the case,
install the appropriate drivers for your operating system (Windows
®
, macOS
®
).
Manual IB-1825M-C31
