SATA power port (15p)
SATA data port for 2.5
" HDD
SATA data port for 3.5
" HDD
Manual / Handbuch IB-174SSK-U
Hardware installation
1.
Turn off the PC and any other connected peripheral devices.
2.
Unplug the power cable from the back of the PC and remove the cover of your PC.
3.
Remove the panel from the available 5.25" bay.
4.
Insert the HDD enclosure into the bay and fix it with 2 screws on each side.
5.
Connect the mobile rack to the SATA port on the motherboard with the included SATA data
cables.
6.
Then connect 15 Pin SATA Power port of motherboard to SATA power port at the back of the
mobile rack.
7.
Finally connect 19 Pin USB 3.0 connector to USB 3.0 port of motherboard. (If there is no USB 3.0
port on the motherboard, it will need to add a PCI Express 19 Pin USB 3.0 card on the mother-
board)
8.
Replace the PC cover and reconnect the power cable for the PC.
9.
Turn on power switch of the mobile rack.
Back View
