Using a 1/8” hex key, make sure the set screws in the radius mount are
pulled out enough that the mount will easily slide down over the pole.
Then retighten set screws.
Set screws
Pole
Mount the VESA plate to the friction mount using the 5/32" hex
key and the 1/4-20 flat head screws supplied.
Thank you for your purchase of an ICW UL90 monitor mount. Any questions? Contact ICW at 1-800-558-4435.
Radius Mount
All Models
Attach your monitor to the UL90
using the 4mm screws supplied.
Use the handles to adjust
the tilt of your monitor.
