ICUserver M3GR, Руководство по эксплуатации

Страница: 17 / 17

16
9) If person/animal moves quickly, it may move out of the camera’s field of view before
photo is taken. Move camera further back or redirect camera.
5.2. Camera stops taking images
1) Please make sure that the SD card is not full. If the card is full, camera will stop taking
images. Alternatively turn on Cycle SD card recording to avoid such problem.
2) Check batteries to make sure that batteries left power is enough for camera to work.
3) Make sure that the camera power switch is in the “On” position.
4) When 3G/GPRS function is on, there will be around 1 minute interval for camera to send
out photo before camera shooting the next photo.
5) Please format the SD card with camera before using or when camera stops taking images.
5.3. Night vision flash range doesn’t meet expectation
1) 4pcs AA batteries is not able to support camera night vision ability; please install 8 pcs
AA batteries.
2) Please check to make sure that batteries are fully charged or remaining power is enough.
3) “Max Range” offers better IR flash range. Given IR flash range values are based on Max
Range setting; so please adjust Night Mode to Max Range for better night vision flash
range.
4) High-quality 1.5V Lithium AA batteries can also offer much better IR flash range; alkaline
batteries cannot deliver enough amperage to power the illuminator consistently at night.
5) To ensure accuracy and quality of night time image, please mount camera to dark
environment without any obvious light sources.
6) A certain surroundings (like trees, walls, ground, etc.) within flash range can get you
better night time images; please do not aim camera to total open field where there is
nothing within IR flash range to reflect flash back; it’s like shining a flashlight into sky in
night, you just can’t see anything.