background image

PROTECTIONS

Overload Protection:

 The Inverter will shut down if the AC output is shorted, or if the 

continuous draw exceeds 300 Watts for more than three seconds. The Inverter can be 
manually reset by turning the Power Switch located on the front panel off, then on. The 
Inverter can supply up to 600 Watts during the overload event, allowing this inverter to start 
larger loads.

Under Voltage Protection:

 The Inverter will shut down if the battery discharges below 10.5 

Vdc (21.0 Vdc for 24V Inverter / 42.0 Vdc for 48V Inverter). The Inverter will automatically 
restart when battery voltage rises to at least 11.8 Vdc (23.6 Vdc for 24V Inverter / 47.2 Vdc for 
48V Inverter).

Over Voltage Protection:

 The Inverter will shut down if the battery voltage exceeds 16.0 Vdc 

(32.0 Vdc for 24V Inverter / 64.0 Vdc for 48V Inverter). The Inverter will automatically restart 
when battery voltage drops below 15.0 Vdc (30.0 Vdc for 24V Inverter / 60.0 Vdc for 48V 
Inverter).

Over Temperature Protection: 

If the Inverter is subjected to higher ambient temperatures 

than than the maximum rated temperature, or if the cooling vents or fan openings are blocked, 
the unit will shut down. The Inverter will automatically restart after the unit cools down.

3

Figure 1: ICT Inverter Front Panel

Figure 2: ICT Inverter Back Panel

POWER SWITCH

AC STATUS LED

(GREEN)

FAULT LED

(RED)

COOLING FAN (TEMPERATURE CONTROLLED)

AC OUTLETS

GROUND CONNECTOR

NEGATIVE DC INPUT

POSITIVE DC INPUT

Содержание SITE INVERTER 300









Отзывы: