ICT PRX-VARIO, Руководство по установке

Страница: 8 / 21

8
PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012
5 Installer Programming
By default the Vario Proximity Card Reader is factory configured to send data in 26 Bit Wiegand Format, it will
read all card formats and operate in the dual LED line mode. This configuration can be changed to suit system
operating requirements.
Programming is completed by presenting a programming card to the unit within the first 2 minutes of power
being applied.
For information on standalone and end user programming options refer to User Programming (see page 14).
5.1 Entering Programming Mode
To program the Vario Reader power it up and then badge the programming card once. The Reader will then
beep twice to indicate the card has been read. It will then flash a red LED to indicate programming mode has
been entered.
i
Present the programming card within 30 seconds of the Reader being powered up. Data entry and
the menu will time out after 2 minutes of no activity and revert to normal activity, any programming
changes will be lost.
5.2 Address Selection
Once the reader is in programming mode present the programming card to the reader the number of times
matching the data value or option for the selected address.
Example: To program Address 3 (LED Configuration) the programming card will be presented to the card reader
three times. The card reader will respond by beeping twice and flashing the Red LED to indicate data entry
mode has been entered and that the user should present the card the required number of times to set the
desired option.
i
Entering an address value that does not exist or not entering any data when an address is selected will
result in the reader timing out and a long beep tone being generated.
Address Programming Options
1 Card Reading Format
2 Data Output Format
3 LED Configuration
4 Intelligent Tamper Mode
5 Auxiliary Button Input Mode
6 Vario Proximity Card Operating Mode
7 Add Standalone Master Card
8 Vario Proximity Card RS-485 Address
9 Door Pre-Alarm Time
10 Door Left Open Time
11 Version Information
12 Default
15 Client Code Configuration