3
Management
3-1. How to wash and clean on a daily basis
①
Remove the valve from the material container.
3
How to remove the material container
Material
container lid
Material
container
Material
container valve
Structure of the
material container
Structure of the material
container valve
Valve lever
O-ring (P16)
Valve
body
O-ring (P14)
Valve rod
②
Remove the valve rod from the valve body.
5
u
Once the washing is done, completely remove the residual moisture and assemble the drum plate in
②
Remove the valve rod from the valve body.
l
If the nozzle part is separated during washing, insert by pushing
with a hand and use it.
③
Remove the O-ring from the valve body.
l
When reassembling the O-ring after washing,
assemble onto the groove in question by referring to
the sizes of the groove.
(Inlet: P16, Outlet P14)
(P16 O-ring is larger than P14 O-ring)
Inlet
Outlet
P16
④
Rotate the valve body counterclockwise and remove.
l
Be careful so that the rubber may not be separated.
If it gets separated, insert and assemble again.
4
How to wash the drum
After removing the material container and drum plate, etc., press the
power switch downward (
Ⅱ
) to rotate the drum.
Thereafter, wash the drum while sprinkling water.
l
When pressing the power switch downward, only the drum will
rotate with no ice-making done.
l
Since the drum is rotating while washing, be careful so that no
injury occurs.
l
Once the washing is completed, turn the switch OFF (press the
middle part of the switch)
Part of drum
to be washed
Drum Rotation
(press downward)
Stop
(middle)
Stop (middle)
P14
Warning
Never place the hands or fingers near the drum while it is rotating.
Otherwise, the hands or fingers may be injured.
5
u
Once the washing is done, completely remove the residual moisture and assemble the drum plate in
reverse order of disassembly.
u
When operating the ice-maker right after completion of washing, first, open the valve on the water
pipe and insert the power plug into the electrical outlet before turning ON the power switch.
11