Innovative Circuit Technology Ltd.
17
E-mail Setup
Use this page to configure the email settings. The information required for this is
available from your Network Administrator, or Internet Service Provider (ISP). Click
on the
Save Settings
button when finished to save and implement all new changes.
Figure 10: E-mail Setup Page
E-mail:
SMTP Server
: Enter the name or the IP address of your SMTP server used for
sending outgoing e-
mail (e.g. “smtp.gmail.com”)
.
SMTP Port
: Enter the port used by your SMTP server (Normally 25).
SMTP Server requires SSL
: Check this box if your SMTP server requires an
encrypted SSL connection.
Sender E-mail Address
: Enter an e-mail address that will appear as the sender
for all e-mail notifications sent from the inverter.
Recipient E-mail Addresses
: Enter one or more e-mail addresses that are to
receive all e-mail notifications from the inverter. Use commas to separate
multiple addresses. This field can also be used to send a text message
notification to a phone; see the
Text Message Alarm Notifications
section for
further information.
SMTP User Name
: Enter an SMTP user name here, if required by your SMTP
server. Leave this field blank if the server does not require authentication.
SMTP Password
: Enter an SMTP password here, if required by your SMTP
server. Leave this field blank if the server does not require authentication.
