ICStation GY21105-1, Руководство пользователя

Страница: 2 / 10

Wooden 60s Voice Record Playback DIY Kit https://www.icstation.com/
2
1>.Recording method:
1.1>.Start recording after prompt voice ‘ di ’ when keep press red button.
1.2>.Stop recording after prompt voice ‘ di di ’ when release red button.
1.3>.Pay attention to aligning the microphone when recording.
1.4>.The louder the sound, the louder the sound during playback.
1.5>.The maximum recording time is 60 seconds.
1.6>.During each recording, the previous recording file will be automatically deleted.
2>.Playing method:
1.1>.Start playing after press black button.
1.2>.Stop after playing once if the toggle switch is switched to '1'. Otherwise loop
playback. Note:It cannot adjust the volume.
5.Package:
1>.1pcs Voice Recording Module
2>.4pcs Wooden Boards
3>.1pcs 3W 4ohm Speaker
4>.1pcs AA*3 Battery Box
5>.1pcs Screwdriver
6>.1pcs Square Nylon Column
6>.12pcs M2*7mm Screw
7>.10pcs M2*4mm Screw
8>.1pcs Transparent Plastic Box
6.Installation Steps( Please be patient ):
1>.Step 1: Remove all available boards from the 4 wooden boards. Be careful not to
damage the wooden board.
2>.Step 2: Fix 1pcs 3W 4ohm Speaker on Wooden Board by 4pcs M2*4mm Screw.
3>.Step 3: Fix 1pcs Voice Recording Module on another Wooden Board by 4pcs
M2*4mm Screw. Note:Loosen the screws slightly and do not tighten them too tightly.
4>.Step 4: Fix 1pcs AA*3 Battery Box on the same Wooden Board by 2pcs M2*4mm
Screw. Note:The wire passes through the middle hole.
5>.Step 5: Fix 1pcs Square Nylon Column on wooden bracket by 2pcs M2*7mm Screw.
6>.Step 6: Fix Square Nylon Column on another wooden bracket by 2pcs M2*7mm
Screw.
7>.Step 7: Fix it on TOP wooden board by 4pcs M2*7mm Screw.
8>.Step 8: Align the wooden boards on the side.
9>.Step 9: Install TOP wooden board and align the wooden boards.
10>.Step 10: Install another side wooden board and align.
11>.Step 11: Install bottom wooden board and align.
12>.Step 12: Connect the AA*3 Battery Box to Voice Recording Module.
13>.Step 13: Connect the 3W 4ohm Speaker to Voice Recording Module.
14>.Step 14: Align and fix speaker wooden board by 2pcs M2*7mm Screw.
15>.Step 15: Align and fix the last wooden board by 2pcs M2*7mm Screw.
7.Install shown steps: