manualshive.com logo in svg

ICS PCI-AOB2 Series, Руководство пользователя

Поделиться
Скачать
ICS PCI-AOB2 Series Скачать руководство пользователя страница 22

Installation        2-3

PCIFind.EXE places itself in the boot-sequence of the OS to refresh the registry on each 
power-up.

This program also provides some COM configuration when used with PCI COM ports. 
Specifically, it will configure compatible COM cards for IRQ sharing and multiple port 
issues.

WIN32IRQ

This directory provides a generic interface for IRQ handling in Windows 95/98/2000/NT.  
Source code is provided for the driver, greatly simplifying the creation of custom drivers 
for specific needs. Samples are provided to demonstrate the use of the generic driver.  
Note that the use of IRQs in near-real-time data acquisition programs requires 
multi-threaded application programming techniques and must be considered an 
intermediate to advanced programming topic.  Delphi, C++ Builder, and Visual C++ 
samples are provided.

Findbase.exe

DOS utility to determine an available base address for ISA bus , non-Plug-n-Play cards.  
Run this program once, before the hardware is installed in the computer, to determine an 
available address to give the card.  Once the address has been determined, run the setup 
program provided with the hardware to see instructions on setting the address switch and 
various option selections.

Poly.exe

A generic utility to convert a table of data into an nth order polynomial.  Useful for 
calculating linearization polynomial coefficients for thermocouples and other non-linear 
sensors.

Installing the Card

The PCI-AOB2/4/6 Series can be installed into a five-volt PCI slot of an IBM or 
compatible computer. Before installing the card, carefully read Chapter 3, Option 
Selection, and configure the card according to your requirements. Finally, our 
SETUP.EXE program will lead you through the process of setting the options on your 
card. The setup program does not set the options. These must be set manually by jumpers 
on the card.

To Install the Card

1)

Turn OFF computer power.

2)

Remove the computer cover.

3)

Set switches and jumpers from either Chapter 3, Option Selection or from the 
suggestions of our SETUP.EXE software program.

4)

Install the card in an available PCI-bus slot.  (You may need to remove a 
backplate first.)

Содержание PCI-AOB2 Series






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды