ICS LT 80, Инструкция по сборке и эксплуатации, Страница: 12 / 18

Assembly manual,use and maintenance Page
12
2.1 PRESCRICTIONS FOR ASSEMBLY
2.2 ASSEMBLY ISTRUCTIONS
I.C.S. INDUSTRIA COSTRUZIONI STAMPI SPA
Via Maura Ponti (Prol. X Lodi)
27010 Copiano Pavia
ASSEMBLY MANUAL, USE
AND MAINTENANCE
EDITION N° 2 OF 13.04.2015
CONTAINER RECYCLING
- 2 -
ASSEMBLY
PRESCRICTIONS FOR ASSEMBLING THE BIN
For the assembly the bin, there is not need to use any tool that may create dangerous
situations, and does not require any type of special training for the assembly.
NB: Make sure that all components are in perfect condition and state of preservation,
so that cracks or deformation affecting the perfect operation of the product. In case
you have abnormal contact your dealer.
FASI ASSEMBLY INSTRUCTION FOR THE BIN
1° Insert the Rubber (Comp. 6) in 4 locations round of the lid
2° Insert the Ring (Comp. 7) in the 2 oval sites of the Bin Body
3° Place the lid (Comp. 2) on the bin, so that the holes [I] and [III] are aligned
on the same wheelbase.
4° Take 2 pins fixing for the lid (Comp. 4), with the steel attachment facing
down, insert them into the holes [I] and [III] previously aligned, and push
them up to perfect coupling on the handle of the bin.
5° Insert the shaft (Comp. 3) into the holes [II] of the bin
6° Take the wheels (Comp. 5) and hook them until at the click of fixing on the
shaft