ICS LT 120, Инструкция по сборке и эксплуатации

Страница: 4 / 18

Assembly manual,use and maintenance Page
4
I.C.S. INDUSTRIA COSTRUZIONI STAMPI SPA
Via Maura Ponti (Prol. X Lodi)
27010 Copiano Pavia
ASSEMBLY MANUAL, USE
AND MAINTENANCE
EDITION N° 1 OF 13.04.2015
CONTAINER RECYCLING
- 1 -
TECHNICAL DATA
1 GENERAL FEATURES
The article, BIN CABINET WITH WHEELS FOR RECYCLING produced by ICS SPA factory in Copiano
(Pavia), is a mobile container with plastic wheels, for the separate collection of materials recovered for
recycling, and waste disposal . The different colors (RED, YELLOW, GREEN, BLUE, BROWN, GREY)
help the differentiation of waste and proper disposal. Featuring Special rubbers cushioning on the lid,
allowing it to absorb the impact of the closure reducing noise after disposal of the waste. (patented) for the
rejection. (patented) Not only in sealing, the container is equipped with cushioning system of opening of
the cover, to eliminate noise in the early stages of recovery of municipal, but also during the complete
manual openings of the lid, avoiding that the same, slam violently against the body of the bin. (patented)
Easy to use and can be moved as Strong wheels with solid rubber tires, secured by axle made of
galvanized steel corrosion. The coupling seat, then the system of attachment of the wheels to the shaft
galvanized, has been studied also to minimize the spaces between the wheels and the bin, avoiding that
during transport of the bin, the rolling of the wheels cause excessive noise.
1.1 PART LIST
The article, BIN WITH WHEELS FOR RECYCLING consists of the following components
· 1 BIN BODY • 2 LID WITH HANDLES
·
3 PINS FIXING THE COVER OF THE BIN
· 4 CUSHIONING OF RUBBER CLOSING THE LID
·
5 CUSHIONING OF RUBBER OPENING THE LID
·
6 GALVANIZED STEEL SHAFT, FOR ATTACHING THE WHEELS
·
7 WHEELS