ICS IC 022, Руководство по эксплуатации, Страница: 13 / 25

Ver. 1.04.19
© 2012 -2019 by ICS
13
Operation of the blasting gun IG 022
To activate the blasting gun, pull the trigger from the handle. The blasting process will
stop by releasing the trigger, it will move in start position by itself. By closing the ice
control valve the ice supply will be interrupted, so that you can carry out the final dry of
the blasted surface only with compressed air.
With the pressure control valve you set desired blasting pressure directly on the gun.
The IC 022 has a
time lag of about 2 seconds
to eliminate residual ice from the dosing
system and thus avoid icing.
Caution!
Always make sure you have the gun safe and firmly in the hand in
order not to endanger yourself and others.
Blasting gun
Ice control valve
Trigger
Pressure control valve