background image

Safety Guide 

Safety 

Guide

    Failure to follow the operating, maintenance and  lubrication requirements set forth

in this  Operation and Maintenance Manual may result in  serious personal injury and/or damage to
the equipment.

The following WARNING statements indicate  potentially hazardous conditions for  operators and
equipment. Make certain that  anyone who works on or around the blower  has read and fully
understands the safety precautions listed.

 

1.

Carefully read this Operation and Maintenance Manual before attempting to operate, service or 
disassemble any part of your blower. 

2.

Never

 operate the unit when mentally or physically fatigued. 

3.

Stay away from rotating parts; avoid wearing  loose jackets, shirts, and ties.  Keep hands and feet  away
from the blower. 

4.

Keep all unauthorized personnel at a safe distance  from the blower. 

5.

Keep all guards in place.  

Never

 make repairs  while the unit is running. 

 Never

 operate if any  guard or

grill is not in place. 

6.

Always wear eye protection.  Loose debris can be  picked up in the air stream and flown in the air.

7.

Hearing protection is required.  Motor and air  noise may exceed safe DB levels. 

8.

Gasoline is extremely flammable and is explosive under certain conditions.  To prevent fire hazards,  do
not place flammable objects close to the  engine. 

9.

Do not overfill the fuel tank.  After refueling,  make sure the tank cap is closed properly and  secured. If
any fuel is spilled, make sure the area  is dry before starting the engine. 

10.

Never

 operate gasoline-powered blowers in an  enclosed or confined area. Exhaust contains poisonous

carbon monoxide gas; exposure may cause loss of consciousness and may lead to  death. 

11.

The muffler becomes very hot during operation and remains hot for some time after stopping the 
engine. Be careful not to touch the muffler while  it is hot.  To avoid severe burns or fire hazards, let  the
engine cool before transporting or storing the unit. 

12.

It is the sole responsibility of the owner/operator  to develop and practice the proper use of the blower
in accordance  with generally accepted ventilation procedures as  well as the department’s own
operating  procedures before placing the unit into service. 

General Information

Blower Identification  

Each industrial power blower has a  model number as well as a serial number.

The model number signifies  information such as blade diameter, engine  type and horsepower. The
serial number relates  to information referencing the date of  manufacture. This information is useful
should it become necessary to contact the factory regarding your Power Blower.

Please write the Serial Number of your power blower in the spaces  below. This will aid us in identifying
which  model you have when assisting you. 

Model Number:                                                                                   

Serial Number:___                                                                              _

Date Purchased:                                                                                  

Serial Number Locations 

ELECTRIC POWERED UNITS:

  The serial  number is located on a plate attached to the motor. 

-3-

Содержание EBS-16












Отзывы: