ICS Auto Sentry-eXP, Руководство по обслуживанию

Страница: 4 / 109

Fujitsu Bill Dispenser
Problem / Cause
• High Bill rejection rate
– Place only dollar bills in good condition in Bill Dispenser cartridge
– Stack dollars neatly in cassette
– Clean MDS sensor area including metal rollers and clear Mylar scrapers
– Check MDS sensor reading in RAS mode 60 (E7 +4) E3 through EB
– Clean BPS sensors and prism
– Tighten white rails in Bill Dispenser cavity
• Bill jams/miss feeds in bill cassette cavity
– Clean black pick wheels and green feed rolls
– Clean PS1 sensor and prism
– Check Bill Dispenser cassette metal tab on frame
– Tighten white rails in Bill Dispenser cavity
• Rejected bills not detected
– Clean Reject sensor
• Jams at Bill Dispenser feed out
– Check that feed out rolls turn when green wheel is turned
– Clean CPS sensor
– Replace worn anti-static brush
• Jams (general)
– Clean all feed rolls, feed belts, and Pick wheels
– Check drive belt tension
– Check Sensor Health Screen in Diagnostics and clean sensors if necessary
– Clean clock wheel and sensor