ICS AOB8/12, Руководство по эксплуатации продукта

Страница: 11 / 33

Manual Number: 00650-134-4 Page 2
AOB8/12 & AOB16/12 Manual
Installing the Card
Before installing the card carefully read the Address Selection and Option Selection sections of this
manual and configure the card according to your requirements. Be especially careful with address
selection. If the addresses of two installed functions overlap you will experience unpredictable
computer behavior. If unsure what locations are available, you can use the FINDBASE program
provided on our diskette to locate blocks of available addresses.
To install the card:
1. Turn off computer power.
2. Remove the computer cover.
3. Remove the blank I/O backplate.
4. Set switches for selected options. See the option selection section of this manual.
5. Select the base address on the card. See the address selection section of this manual
6. Install the card in an I/O expansion slot.
7. Install the I/O cable.
8. Inspect for proper fit of the card and cables, tighten screws.
9. Replace the computer cover and apply power.
How to remain CE Compliant
This device complies with CE Directives 72/23/EEC and EMC 89/336/EEC. CE compliance is
based on the interaction of all the components of a system. Any modifications made to the equip-
ment may affect the CE compliance and must be approved in writing by Industrial Computer
Source. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to claim CE compliance.
The Model AOB8/12 & AOB16/12 are designed to be CE Compliant when used in an CE compli-
ant chassis. Maintaining CE Compliance also requires proper cabling and termination techniques.
The user is advised to follow proper cabling techniques from sensor to interface to ensure a com-
plete CE Compliant system. Industrial Computer Source does not offer engineering services for
designing cabling or termination systems. Although Industrial Computer Source offers accessory
cables and termination panels, it is the user's responsibility to ensure they are installed with proper
shielding to maintain CE Compliance.