ICS 603GC, Руководство оператора, Страница: 22 / 26

603GC OPERATOR’S MANUAL
22
© 2006 ICS, Blount Inc. P/N 518538 Jul 06
MAINTENANCE
GUIDE BARS
• The guide bar is designed to be used on both sides. If the cut is consistently leading to one side,
turn the guide bar over to expose a new set of guide rails.
• A bench mounted belt or disc sander can be used to square the rails of a worn guide bar. A badly
worn guide bar can quickly damage a diamond chain. If the diamond chain is touching the bottom
of the guide bar groove, replace the guide bar.
• Check the guide bar for straightness. Minor adjustments can be made by bending the guide bar
slightly.
• Proper diamond chain tension will extend guide bar life. See page 9 & 10.
• Under some circumstances, especially low water pressure, the sprocket nose can wear out
before the guide bar body.
• Spray the diamond chain and guide bar with lightweight oil for storage.
• Store guide bar with the sprocket nose up.
• Periodically clean the water ports inside the groove of the guide bar using a small diameter piece
of wire.
• The guide bar is solely a guide track for the diamond chain. Never use the guide bar to lift, twist
or pry concrete material.