ICS Advent PCI-DIO32, Руководство пользователя

Страница: 20 / 28

Technical Description 3-3
The following table shows four common input resistors and the ranges
associated with each:
The maximum input voltage can be increased by increasing the input resistor
accordingly. Because socketed DIP resistor networks are used, they can easily
be replaced with a different value. This can be done at the factory. The input
circuits are not intended for monitoring 120-volt AC circuits. This
voltage is too high for the circuits and dangerous to have on the card.
Table 3-1. Sensor Input Ports Pin Assignments (DB-37 Female Labeled as Input)
Input
Resistor
(ohms)
Value
Turn-On
(volts)
Max Input
Range
(volts)
Max
Current
(mA)
220 1.76 7 27
560 2.8 12 19
1K 4.1 16 15
2.2K 7.7 24 10
Port A Bit P1 Pin# Port B Bit P1 Pin#
0 18,37 0 10,29
1 17,36 1 9, 28
2 16,35 2 8, 27
3 15,34 3 7, 26
4 14,33 4 6, 25
5 13,32 5 5, 24
6 12,31 6 4, 23
7 11,30 7 3, 22
Ground 2,20,21
+ 12V 19
+ 5V 1